Christie LWU420 User Manual Page 34
- Page / 82
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
32
LWU420 User Manual-Operating Guide 020-000262-01 Rev. 1 (06-2010)
IMAGE Menu
IMAGE Menu
From the IMAGE Menu, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons on the
projector or remote control, and press the ► cursor button
on the projector or remote control, or
ENTER button on
the remote control to execute the item. Then perform it
according to the following table.
Item Description
ASPECT
Using the ▲/▼ buttons switches the mode for aspect ratio.
For an RGB signal
NORMAL
4:3
16:9
16:10
REAL
For an HDMI signal
NORMAL
4:3
16:9
16:10
14:9
REAL
For a Video signal, S-video signal or Component video signal
4:3
16:9
16:10
14:9
REAL
For no signal
16:10 (fixed)
• The NORMAL mode keeps the original aspect ratio of the signal.
•
Some input signals may not be displayed in the aspect ratio as
selected in the menu. In this case, use the
ASPECT button on the
remote control to select other aspect ratio.
OVER SCAN
Using the ▲/▼ buttons adjusts the over-scan ratio.
Large (It reduces picture)
Small (It magnifies picture)
•
This item can be selected only for a video, s-video, component and HDMI signal.
V POSITION
Using the ▲/▼ buttons adjusts the vertical position.
Up
Down
•
Over-adjusting the vertical position may cause noise to appear on the screen. If this
occurs, please reset the vertical position to the default setting. Pressing the
RESET
button when the V POSITION is selected will reset the V POSITION to the default setting.
•
When this function is performed on a video signal, s-video signal, or component video
signal of 480i@60 or 576i@50 input the range of this adjustment depends on the OVER
SCAN
(
above)
setting. It is not possible to adjust when the OVER SCAN is set to 10.
• This item cannot be selected for an HDMI signal.
H POSITION
Using the ▲/▼ buttons adjusts the horizontal position.
Left
Right
•
Over-adjusting the horizontal position may cause noise to appear on the screen. If this
occurs, please reset the horizontal position to the default setting. Pressing the
RESET
button when the H POSITION is selected will reset the H POSITION to the default setting.
•
When this function is performed on a video signal, s-video signal, or component video
signal of 480i@60 or 576i@50 input the range of this adjustment depends on the OVER
SCAN
(
above)
setting. It is not possible to adjust when the OVER SCAN is set to 10.
• This item cannot be selected for an HDMI signal.
(continued on next page)
- User Manual-Operating Guide 1
- About this manual 3
- Contents 4
- Projector features 5
- Preparations 5
- Contents of package 5
- Part names 6
- Projector 6
- Setting up 10
- AUDIO OUT 12
- NOTE for HDMI 13
- Connecting power supply 14
- Remote control 15
- Laser pointer 15
- Installing the batteries 15
- Remote control 16
- B/CB/PG/Y 17
- Turning on the power 19
- Power on/off 19
- Turning off the power 19
- Temporarily muting the sound 20
- Operating 20
- Adjusting the volume 20
- Selecting an input signal 20
- Selecting an aspect ratio 21
- Searching an input signal 21
- Zoom ring 22
- Focus ring 22
- Adjusting the position 23
- Correcting distortion 23
- Using the magnify feature 25
- Freezing the screen 25
- PbyP (Picture by Picture) 27
- Using the menu function 28
- EASY MENU 29
- PICTURE Menu 31
- PICTURE Menu (continued) 32
- IMAGE Menu 34
- IMAGE Menu (continued) 35
- INPUT Menu 36
- SCART OUT 37
- INPUT Menu (continued) 38
- RESOLUTION menu 39
- CUSTOM RESOLUTION 39
- SETUP Menu 40
- SETUP Menu (continued) 41
- AUDIO Menu 43
- SCREEN Menu 44
- SCREEN Menu (continued) 45
- OPTION Menu 49
- OPTION Menu (continued) 50
- 1. Using Security Features 54
- PASSWORD 55
- ENTER PASSWORD 56
- BOX (large) 56
- NOTE PASSWORD 56
- PIN LOCK on/off menu 56
- PIN CODE AGAIN BOX 57
- Inquiring Code 57
- (PIN Code) 57
- Transition Detector 58
- ENTER PASSWORD BOX 59
- NETWORK Menu 62
- NETWORK Menu (continued) 63
- C.C. (Closed Caption) Menu 67
- Maintenance 68
- HIGH VOLTAGE 69
- Air filter 70
- Internal clock battery 71
- Other care 72
- Troubleshooting 73
- Related messages 73
- Regarding the indicator lamps 74
- Warranty and after-service 79
- Specifications 79
- (DT00873) 79
- (MU05661) 79
- Specifications (continued) 80
- 82
- 82
Related products and manuals for Data projectors Christie LWU420
Data projectors Christie LW555 User Manual
(92 pages)
(92 pages)
Data projectors Christie D4K25 User Manual
(160 pages)
(160 pages)
Data projectors Christie CP 2210 User Manual
(164 pages)
(164 pages)
Data projectors Christie LX750 User Manual
(80 pages)
(80 pages)
Data projectors Christie LX700 User Manual
(86 pages)
(86 pages)
Data projectors Christie LWU505 User Manual
(96 pages)
(96 pages)
Data projectors Christie DHD700 User Manual
(88 pages)
(88 pages)
Data projectors Christie L2K1000 User Manual
(102 pages)
(102 pages)
Data projectors Christie Christie HD User Manual
(166 pages)
(166 pages)
Data projectors Christie DS+650 User Manual
(82 pages)
(82 pages)
Data projectors Christie Mirage WU User Manual
(150 pages)
(150 pages)
Data projectors Christie LW720 User Manual
(80 pages)
(80 pages)
Data projectors Christie LX650 User Manual
(78 pages)
(78 pages)
Data projectors Christie L2K1500 User Manual
(102 pages)
(102 pages)
© 2020, manymanuals.com. All rights reserved. | 1.701 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals