Christie 38-814008-61 User Manual download pdf (Page 9)

Section 1: Introduction

The Christie Heat Extractor Kit User Manual 1-3

020-100834-02 Rev. 1 (03-2012)

4. Install the extractor:

a. Connect the duct to the extractor.

b. Twist to secure the flaps over the pins on the extractor and make sure the extractor grill faces down.

5. Install the safety cables:

a. For elevated installations or when using the 1.82 meter (6 foot) duct, attach the three safety cables; one

from the extractor to the FredFrame or structure holding the projector, one from the extractor to the

duct, and one from the extractor to the supporting structure.

b. For floor mount installations, attach one end of the safety cable to the extractor and the other end to the

igniter door latch.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 45 46

No comments

Christie 38-814008-61 User Manual Page 9