Christie DS+6K User Manual download pdf (Page 3)

Lamp Replacement Instructions

3 of 4

WARNING

Do not stick hands into an empty lamp compartment, especially if the other

lamp is still on. The lamp compartment can become quite hot and cause

physical injury.

7. On the new lamp module, turn the three lock screws to the “unlock” position before

inserting it into the lamp compartment. Align

the lamp with the three pins located at the back

of the compartment. Insert the lamp all the way

in until it is fully seated. (Figure 4.)

8. Turn the three lock screws on the new lamp

module clockwise a quarter turn to “lock” it in

place.

9. Close the lamp door and tighten the screw to

secure it in place.

NOTE: The projector automatically detects a new

lamp and records the serial number in software the

next time it’s powered up. Manual entry of the

serial number is not required.

Figure 4.

1 2 3 4

No comments

Christie DS+6K User Manual Page 3