Christie LW551i User Manual download pdf (Page 19)

Operating Guide 020-000461-02 Rev. 1 (06-2012)

LX501/LX601i/LW401/LW551i/LWU421/LWU501i

Connecting to a power supply

Put the connector of the power cord into the

AC IN (AC inlet) of the projector.

Firmly plug the power cord’s plug into the

outlet. In a couple of seconds after the power

supply connection, the POWER indicator will

light up in steady orange.

►Do not connect the projector to a power supply while no lens

unit is attached to it.

►Please use extra caution when connecting the power cord, as incorrect or

faulty connections may result in  re and/or electrical shock.

• Do not touch the power cord with a wet hand.

• Only use the power cord that came with the projector. If it is damaged, consult

your dealer to get a new one. Never modify the power cord.

• Only plug the power cord into an outlet whose voltage is matched to the power

cord. The power outlet should be close to the projector and easily accessible.

Remove the power cord for complete separation.

• Do not distribute the power supply to multiple devices. Doing so may overload

the outlet and connectors, loosen the connection, or result in  re, electric shock

or other accidents.

• Connect the ground terminal for the AC inlet of this unit to the ground terminal

of the building using an appropriate power cord (bundled).

• This product is also designed for IT power systems with a phase-

tophase voltage of 220 to 240 V.

WARNING

Please remember that when the DIRECT POWER ON

function activated (

67), the connection of the power

supply make the projector turn on.

NOTICE

Setting up

AC IN

Power

cord

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 127 128

No comments

Christie LW551i User Manual Page 19