Christie PowerTool User Manual download pdf (Page 20)

Section 3: Working with PowerTool

3-4 PowerTool 2.1 User Manual

020-100035-03 Rev. 1 (12-2010)

firewall may not be configured correctly. If some projectors are found

and others are not, you may have problems with one or more of the

following: duplicate IDs or IP addresses, incorrect IP addresses, or

incorrect firewall configuration.

3. Click Search. PowerTool detects all the projectors that are connected.

Figure 3-4 Projectors found

NOTE: Projectors flagged with the message “COMM ERROR” have been

detected, but are not responding to communication. They cannot be selected

for configuration until the communication problem has been resolved.

4. Click a projector to select it. To deselect it, click it again. To select all of

the projectors shown, click Select All. To clear your selection, click

Deselect All.

5. Click Next to add the projectors to the configuration. Projectors are

added in the order they are selected.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 51 52

No comments

Christie PowerTool User Manual Page 20