Christie PowerTool User Manual download pdf (Page 25)

Christie PowerTool 3.1 User Manual 15

020-100035-04 Rev. 1 (02-2014)

Work With Configuration Files

This section provides information and procedures for working with PowerTool configuration files.

You can create configuration files to store custom projector settings. When you open PowerTool a

new, empty configuration is automatically created. You can use the default configuration and save it

later, or you can open an existing configuration.

Save a Configuration File

1. Click File > Save As.

2. Browse to a location where you want to save the file.

3. Enter a name for the configuration file in the File name field.

4. Click Save.

5. Click OK.

Open a Configuration File

1. Click File > Open.

2. Browse to the location of the configuration file.

3. Select the configuration file.

4. Click Open.

Add a Projector to a Configuration File with the

Search Function

To locate a projector with the search function, the projector must be on the same subnet as the

computer on which PowerTool is installed. In addition, the projector must be connected to the

network.

If the error message COMM ERROR appears, verify the correct port is specified. The error message

can also appear during periods of high network traffic, or when the projector is not functioning

correctly.

If auto detection fails, make sure every projector is assigned a unique identification number and IP

address and verify the firewall and router settings are correct.

1. Click File > Add Projectors.

2. Click the Broadcast tab.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

No comments

Christie PowerTool User Manual Page 25