Christie Entero RPMWU Setup Guide Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 58
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
2-2 Entero RPMWU/RPMSP-LED01 Setup Guide
020-100445-01 Rev. 1 (12-2009)
Section 2: Installation and Setup
2. Connect the Electronics Module to the Projector Head Module and Light Module. See
Figure 2-2
.
Figure 2-2 Module Interconnections
2.4 Lens Information
Use the lens cap when transporting the lens to avoid scratching and damaging the lens.
The Entero projector includes a lens mount that allows lens control and adjustment: vertical and horizontal
offsets, zoom and focus. The lens mount can be fitted with any one of the available optional lenses – see
Section 5 Specifications.
Zoom and Focus – Adjust zoom to fit the displayed image on the screen and adjust focus to improve the
clarity of the image.
Shutter – Standard on all models, the shutter allows you to turn the screen absolutely black when in the
“Closed” state. An additional WHITE shutter state allows you to view an image (and menus) if projector
settings turn the visible light OFF.
Cleaning the Lens
Check periodically. A small amount of dust or dirt on the lens has minimal effect on image quality. To avoid
the risk of scratching the lens, clean only if absolutely necessary.
Dust:
1. Brush most of the dust from the lens with a camel-hair brush or blow dust away with a dust-free blower.
2. Fold a microfibre cloth smooth and gently wipe remaining dust particles from the lens. Wipe evenly with
the smooth portion of the cloth that has no folds or creases. DO NOT apply pressure with your fingers - use
the tension in the folded cloth itself to collect dust.
3. If significant dust is still bound to the surface, dampen a clean microfibre cloth with coated optics cleaning
solution (damp, not dripping). Wipe gently until clean.
Fingerprints, smudges, or oil:
1. Brush away most of the dust with a camel-hair brush and/or blow away using a dust-free blower.
2. Roll a lens tissue around a swab and soak it in coated optics cleaning solution. Tissue should be damp, but
not dripping.
Page view 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 57 58

Comments to this Manuals

No comments