NOTE: For this procedure you will need a “Roadster / Vista / Mirage 5000 Lamp
and Filter Replacement Kit” or a “DLV1280-DX / Mirage 2000 Lamp and Filter
Replacement Kit”. Both are manufactured by Christie Digital Systems.
The high brightness of your projector is provided by a Xenon lamp (500W in Mirage
2000, 1200W in Mirage 5000) permanently mounted inside its own protective
housing. For maximum brightness, this lamp assembly should be replaced after 1000
hours of use.
The number of hours logged on the current lamp appears both in the Lamp submenu
(accessed through the Advanced menu) and the Status menu. In the Status menu, do
not confuse “Lamp Hours” with “Lamp Counter”, which indicates the number of
hours logged during the current rental period only and is normally used just for
rented projectors.
NOTE: As the lamp nears its limit (as set in
Lamp Limit
), a message can appear on
screen to warn that the lamp needs to be replaced. To make sure that this warning
appears, enter a checkmark in the
Lamp Message
checkbox located in the
Lamp
submenu.
You will need a long (10”) Phillips screwdriver for this procedure.
5HSODFLQJWKH
/DPSDQG)LOWHU
Comments to this Manuals