Christie Mirage 5000 User Manual download pdf (Page 84)

Although the Brightness Uniformity control can be used for a single image, it is

particularly useful for setting up and maintaining tiled images as a “seamless” display

wall in which the color cast and light output appear uniform throughout each image

as well as throughout the entire wall.

For best results, avoid “experimenting” with Brightness Uniformity controls—follow

the Achieving Brightness Uniformity procedure provided in 3.9, Using Multiple

Projectors.

The Service submenu is also accessed through the Advanced menu, but it is

password-protected and intended for use by qualified service technicians only.

This read-only menu lists a variety of details about the standard and optional

components currently in use on the projector. Refer to the Status menu for versions of

hardware (left side) and software (right side) installed, the number of lamp hours

logged in total and for a specific period (such as a rental period), and for your

projector model name and serial number. In addition, the Status menu identifies the

current channel, switcher, slot and frequencies.

Use

, , or

to see additional Status information.

A single projector can display 3D images as described below. Such images require a

specialized source as well as additional hardware and software in order to be

displayed and interpreted correctly in a typical 3D active stereo viewing

environment.

In simple terms, images generated from a 3D-video source consist of a series of

images (frames or fields) that alternate quickly between two slightly different



 ',PDJHV



1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 153 154

No comments

Christie Mirage 5000 User Manual Page 84