Christie DWX600-G User Manual download pdf (Page 11)

LX505/605 RS232 Codes-Basic Technical Reference Information 11 of 27

020-000241-01 Rev. 1 (02-2010)

6.5 POWER ON COMMAND

6.6 POWER OFF COMMAND (QUICK POWER OFF)

6.7 POWER OFF COMMAND

6.8 INPUT 1 COMMAND

Command “C00” [CR]

Detail

Power ON

When already Power is ON, no operation is started. When sending this command

during Countdown in process, Countdown is terminated.

Response

Acceptable [ACK] [CR]

Unacceptable “?” [CR]

Command “C01” [CR]

Detail

Power OFF (Standby)

This command executes Quick Power OFF operation without displaying “Power

OFF?” message, which is displayed when Power is turned OFF with ON/STAND-

BY button of the projector or remote control.

Response

Acceptable [ACK] [CR]

Unacceptable “?” [CR]

Command “C02” [CR]

Detail

Power OFF (Standby)

This command works the same way as when Power is OFF with ON/STAND-BY

button of the projector and remote control.

(When the

command is sent once, “Power OFF?” message is displayed. If this

command is sent again while “Power OFF?” message is displayed,

Power OFF

operation is executed.)

When sending this command during Countdown in process, Countdown is

terminated.

Response

Acceptable [ACK] [CR]

Unacceptabl

“?” [CR]

Command “C05” [CR]

Detail

Select Input 1. This command works differently from the command by “Input 1” key

of the remote control. When Input 1 has been already selected, this command does

not execute the source switching; just for switching to Input 1.

Although projector returns “OK”, Input search is not executed with this command

while Input button is set to Mode2 or Mode3.

Response

Acceptable [ACK] [CR]

Unacceptable “?” [CR]

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comments to this Manuals

No comments

Christie DWX600-G User Manual Page 11

Comments to this Manuals

Related products and manuals for Projectors Christie DWX600-G