Christie DWX600-G User Manual download pdf (Page 26)

26 of 27 LX505/605 RS232 Codes-Basic Technical Reference Information

020-000241-01 Rev. 1 (02-2010)

7.5 INPUT MODE READ COMMAND

7.6 LAMP TIME READ COMMANDSETTING READ COMMAND

Command “CR1” [CR]

Detail Get currently selected Input No.

Response

Acceptable “%1” [CR]

”1” = Input 1 is selected.

“2” = Input 2 is selected.

“3” = Input 3 is selected.

“4” = Input 4 is selected.(only for Networking-capable models)

Unacceptable “?” [CR]

Command “CR3” [CR]

Detail

Get total lamp running hours.

*return lamp operating time multiplied by the given coefficient (not actual used time)

Response

Acceptable “%1” [CR]

Display Lamp running hours with 5 digit numbers.

Example:

“00410” [CR] ---------- 410 hours

Unacceptable “?” [CR]

Command “CR4” [CR]

Detail Get screen setting status such as Ceiling/Rear.

Response

Acceptable “%1” [CR]

“11” [CR] = Normal Screen Setting

“10” [CR] = Picture is top/bottom reversed. (Status: Rear & Ceiling

ON)

“01” [CR] = Picture is left/right reversed. (Status: Rear ON)

“00” [CR] = Picture is top/bottom and left/right reversed. (Status:

Ceiling ON

)

Unacceptable “?” [CR]

1 2 ... 21 22 23 24 25 26 27 28

No comments

Christie DWX600-G User Manual Page 26