Christie Matrix 3000 User Manual download pdf (Page 14)

TECHNICAL SPECIFICATIONS

Performance speciﬁcations are typical and are subject to change without notice.

*Additional lenses planned for production 2010.

**Note: Each offset is speciﬁed with the other at zero. Simultaneous horizontal and vertical offsets may limit the adjustment range of each.

For the most current speciﬁcation information, please visit www.christiedigital.com

or tradenames of their respective holders. Canadian manufacturing facility is ISO 9001 and 14001 certiﬁed. Performance speciﬁcations are typical.

Due to constant research, speciﬁcations are subject to change without notice. Printed in Canada on recycled paper. 2559 Nov 09

Christie Matrix StIM

Image

brightness

•

600 lumens ±10% (rated at 75-80% EBU depending on the lens)

contrast

•

10,000:1 dynamic contrast (optimized in real-time based on scene content)

•

No mechanical iris required

uniformity

•

>95% brightness and color uniformity after electronic adjustment

Display

type

•

Revolutionary solid state projector using a single TI Darkchip 3

DMD with a solid state Illumination engine (no color wheel)

and sealed optics

native resolution

•

Native 1920 x 1200 (16:10 aspect ratio) WUXGA

Lenses*

ﬁxed

•

0.64:1 WUXGA ﬁxed IR and visible light optimized lens

zoom

•

1.2-1.6:1 WUXGA zoom IR and visible light optimized lens

offsets

•

0.64:1 lens features ±5% (horizontal) and ±5% (vertical) offset when mounted in landscape orientation

•

1.2-1.6:1 lens features ±75% (horizontal) and ±100% (vertical) when mounted in landscape orientation**

Optical

system

lens mount

•

Mechanical, horizontal and vertical lens shift

•

Tool-less lens insertion system

•

3 point 60 degree bore sight adjustment

•

No shutter required

•

No iris required – user programmable illumination parameters (eliminates the need for a mechanical shutter)

illumination

•

Full spectrum InfraRGB

(RGB + IR LEDs)

•

Illumination package has a MTBF of 50,000hrs

•

Light module can be changed in 15 minutes and is color and bright level matching in real-time to the projector array

ArrayLOC

•

Manages the brightness, color space and black levels of all projectors within an array to a common level, in real-time with no additional latency

Input

signals

•

Native 1920 x 1200 recommended, up to 1920 x 1200 native WUXGA

pixel clock

•

165MHz max input

scan rates

•

Horizontal: 15-120KHz

•

Vertical: 23.97-60Hz

Inputs, control and networking

•

DVI-D and HD15 analog standard

•

On-board Ethernet control capabilities (ChristieNET

functionality)

•

Additional Ethernet connections

for ArrayLOC™ network

•

IR/wired remote control as part of optional user kit

•

2 – RS-232 ports and 1 RS-422 port

•

Optional analog input card

•

Optional DVI-D input card

•

Optional HDSDI input card

•

Optional electronics module for dedicated IR image generator

Accessories

standard

•

Line cord

optional

•

Analog RGBHB input card

•

DVI-D input card

•

HDSDI input card

•

Electronics module for dedicated IR image generator

•

Remote IR sensor

•

User kit (includes manual, IR remote)

•

Rugged Motion Platform user kit (purpose-built)

Enhanced feature sets

•

Minimum Processing Latency (MPL

)

•

Christie Twist

II – Advanced warping/edge-blending hardware technology integrated directly into the

projector, includes warping/blending software

•

Auto set-up, power up

•

Menus in 5 languages

•

Christie AccuFrame

adjustable to <5ms

•

Multiple channel memories (for recall memory storage)

•

Christie ArrayLOC

– automatic, continuous management of brightness, color space and

black levels of all projectors in the array to a common level, in real-time

•

Christie InfraScene

– the capability of the simultaneous display of both

visible light and infrared projection

Power

requirements

operating voltage

•

100-240 VAC @ 50/60Hz

operating current

•

Estimated max – 5.6A @ 100 VAC, 2.8A @ 200 VAC

power

•

400W max (variable, dependant on content)

dissipation

•

1364BTU/hr

Dimensions

size

•

Projector head module + light module (no lens): (LxWxH): 8.7 x 18.4 x 11.0" (220 x 467 x 287mm)

•

Electronics module: (LxWxH): 16.5 x 5.5 x 6.7" (420 x 140 x 170mm)

volume

•

Projector head module + light module (no lens): 1,761in

(29,486cm

)

•

Electronics module: 608.0in

(9,963.3cm

)

weight

•

Projector head module + light module (no lens): 35lb (15.9kg)

•

Electronics module: 9.7lb (4.4kg)

shipping weight

•

72lb (32.7kg)

Operating environment

•

Temperature: 40-95º F (5-35º C)

•

Humidity: 20-80% non-condensing

•

Noise: less than 38dBA estimated

Regulatory approvals

•

UL/CSa/IEC 60950-1

•

EMC-emissions: FCC part 15 and EN55022 (CISPR22) Class A

•

EMC-immunity: EN55024

•

RoHS compliant

Limited warranty

•

2 years parts and labor

•

Contact an authorized Christie representative for full details of our limited warranty

Corporate ofﬁces Worldwide ofﬁces

Independent sales

consultant ofﬁces

Christie Digital Systems USA, Inc

USA – Cypress

ph: 714 236 8610

Christie Digital Systems Canada, Inc.

Canada – Kitchener

ph: 519 744 8005

United Kingdom

ph: +44 118 977 8000

Germany

ph: +49 2161 664540

France

ph: +33 (0) 1 41 21 44 04

Eastern Europe and

Russian Federation

ph: +36 (0) 1 47 48 100

Dubai (United Arab Emirates)

ph: +971 (0) 4 299 7575

India

ph: (080) 41468941 – 48

Singapore

ph: +65 6877 8737

China (Shanghai)

ph: +86 21 6278 7708

China (Beijing)

ph: +86 10 6561 0240

Japan (Tokyo)

ph: +81 3 3599 7481

Korea (Seoul)

ph: +82 2 702 1601

Spain

ph: +34 91 633 9990

Italy

ph: +39 (0)2 9902 1161

South Africa

ph: +27 (0) 317 671 347

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21

Comments to this Manuals

No comments

Christie Matrix 3000 User Manual Page 14

Comments to this Manuals

Related products and manuals for Projectors Christie Matrix 3000