Christie CP2000-X User Manual download pdf (Page 20)

PARTS & MODULE REPLACEMENT

CP2000-X Parts & Module Replacement

LIQUID COOLING SYSTEM

(40 minutes)

NOTE: See also Pump and Fan, Heat Exchanger.

The liquid cooling system consists of a pump, coolant reservoir, and heat

exchanger/fan linked together with clear hoses and mounted between the lamp

blower and the igniter. To access and replace this system:

1) Remove the projector lid, igniter door, rear lid and belly pan. See Removing

the Covers.

2) Disconnect the pump motor and heat exchanger/fan from the ACDM.

3) Reaching into the light

engine area, depress both

of the quick-release

connectors linking the 2

hoses from the light engine

to the cooling components

in the igniter area:

 Stand on the lamp side

of the projector.

 Insert hand between

the card cage and the

hose link cover (see

right).

 Depress the connectors

to release hoses,

pushing toward the

front of the projector.

Carefully pull hoses

free at the underside of

the projector.

4) In the igniter area, remove

the reservoir cradle (2

nuts)—the reservoir will

still be attached via hose to

the pump. See right.

Figure 27. Access to the Quick-Release

Connectors

Figure 28. Remove Reservoir Cradle

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 29 30

No comments

Christie CP2000-X User Manual Page 20