Christie LCD projector User Manual download pdf (Page 42)

4-8 CP2210 User Manual

020-100410-08 Rev. 1 (05-2014)

Section 4: Adjusting the Image

c. Select 1998x1080 1.85 Flat in the Source File list.

d. Select Flat in the Screen File list.

4. Tap Config 2 in the left pane and edit these settings:

a. Select 3D Onsite in the Measured Color list. If this option is not available, see 4.11.5 Define a Mea-

sured Color Gamut Data File.

b. Select DC28_DCIXYZE_314_351 in the Target Color list.

c. Select YCxCz Inverse ICT in the Color Space list.

d. Select Gamma 2.6 in the Gamma list.

e. Select Linear_9x9x9 in the LUT-CLUT list.

5. Tap 3D Control in the left pane and edit these settings:

a. Select Line Interleave in the 3D Sync Input Mode list.

b. Select 6:2 in the Frame Rate N:M list.

c. Select Left (L1R1 L2R2) in the L/R Display Sequence list.

d. Select True in the 3D Sync Polarity list.

e. Enter 430 in the Dark Time field or enter a value appropriate for your 3D hardware.

f. Enter -120 in the Output Delay field or enter a value appropriate for your 3D hardware.

g. Enter 0 in the Phase Delay field or enter a value appropriate for your 3D hardware.

4.11.7 Edit the 3D Scope 2048 x 858 Channel

1. Tap Menu > Channel Setup.

2. Select 3D Scope 2048x858 in the Channel Name list.

3. Tap Config 1 in the left pane and edit these settings:

a. Select 292-Dual in the Input list.

b. Select YCrCb 4:2:2 10 bits x2 in the Data Format list.

c. Select 2048x858 2.39 Scope in the Source File list.

d. Select Scope in the Screen File list.