Christie LCD projector User Manual Page 52

  • Download
  • Add to my manuals
  • Print
  • Page
    / 140
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 51
5-2 CP2210 User Manual
020-100410-08 Rev. 1 (05-2014)
Section 3: Operation
5.3 Cinema Projector Power States
The following table identifies what occurs when the TPC’s Power and Lamp buttons are tapped during any of
the cinema projectors 4 main power states. See Table 5.1.
Table 5.1 cinema projector Status when any TPC Lamp or Power Buttons Selected
5.4 Cinema Projector LED Status Indicators
Red, yellow, and green LEDs on the top and rear corners of the cinema projector indicate the status of the
cinema projector. The LEDs can be solidly lit, or they can flash frequently or intermittently. This table lists the
LED state and the associated meaning:
Table 5.2 Cinema Projector Status LED Legend
cinema projector’s Current State:
Standby Power Mode
(Solid Yellow)
Power ON/ Lamp OFF
(Green Blip)
Power ON / Lamp ON
(Solid Green)
Cooling Down
Mode (Yellow Blip/
Green Blip)
TPC Buttons Tapped:
Power ON
To full power ON
(boot delay)
No action No action Cancels cool down,
goes into full
power
Power OFF
No action Power OFF
immediately
Lamp OFF
(immediately), enters
cool down mode
No action
Lamp ON
To power ON and
lamp ON (boot delay)
To lamp ON
(immediately)
No action Cancels cool down,
goes to Lamp ON
(immediately)
Lamp OFF
No action No action Lamp OFF
(immediately)
No action
LED State Description
Solid Green
Lamp ON Power is ON, Lamp is ON.
Green Blip
Power ON Power is ON, Lamp is OFF. The lamp can be struck when in this mode.
Solid Yellow
Standby mode Power is OFF, Lamp is OFF. Power saving mode.
Yellow Blip/
Green Blip
Cool down mode Transitioning to Standby mode. Power is ON, Lamp is OFF.
The lamp can be struck when in this mode.
Flashing Red
New critical alarm
or warning
New critical alarm or warning has NOT been acknowledged by operator.
Solid Red
Existing critical
alarm or warning
Critical alarm or warning exists, but has been acknowledged by operator.
Page view 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 139 140

Comments to this Manuals

No comments