Christie LCD projector User Manual download pdf (Page 99)

Section 6: Projector Menus

CP2210 User Manual 6-43

020-100410-08 Rev. 1 (05-2014)

Add a Network Device

1. In the Device Name area, select the check box to the left of the device you are adding.

2. Enter the device name in the Device Name field.

3. In the URL field, enter the URL of the device you are adding

4. Click Menu, select Network Device, and then select a network device. The web interface for this device

appears.

6.15.9 GPIO Setup Window

Use the GPIO Setup window to configure the input and output settings of the GPIO interface. To open the

GPIO Setup window you need Administrator or Service permissions. Tap Menu > Administrator Setup >

GPIO Setup.

Table 6.29 GPIO Setup Window

Control Description

Rising Edge The rising edge for the signal.

Falling Edge The falling edge for the signal.

Trigger The trigger that is sent when the function is activated.

Output The output that triggers the GPIO signal.

Figure 6-36 GPIO Setup Window

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 139 140

No comments

Christie LCD projector User Manual Page 99