Christie Christie HD Setup Guide download pdf (Page 13)

M Series Setup Guide 2-1

020-100011-06 Rev. 1 (05-2013)

2 Installation and Setup

2.1 Projector Quick Setup and Installation

The following instructions are for those preferring a quick setup. Refer to the remaining subsections for

detailed setup instructions.

Always power down the projector and disconnect all power sources before

servicing or cleaning.

See the Safety Warnings and Guidelines in 1.2 Safety Warnings and Guidelines.

2.1.1 Install a Projection Lens

The projection lens, shipped separately from the projector, must be installed prior to setting up the projector.

Remove the lens plug from the lens opening in the projector before installing

the lens. Retain the lens plug for projector transportation to protect the

optical components from dust and debris.

IMPORTANT! The lens seals the projector, preventing contaminants from entering the interior of the

projector. Never operate a projector without a lens. Remove the rear lens cap from the lens.

Keep the front lens cap on the lens to protect it during installation.

1. Rotate the lens clamp to the OPEN position, as shown.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 53 54

No comments

Christie Christie HD Setup Guide Page 13