Christie Christie HD Setup Guide download pdf (Page 31)

Section 3: Operation

M Series Setup Guide 3-9

020-100011-06 Rev. 1 (05-2013)

• Use the FOCUS and the LEFT ARROW or RIGHT ARROW KEY to improve image clarity as desired.

• Use the Z

OOM and the LEFT ARROW or RIGHT ARROW KEY to achieve a desired image size.

• Use the L

ENS H and the LEFT ARROW or RIGHT ARROW KEY to position the image horizontally.

• Use the L

ENS V and the UP ARROW or DOWN ARROW KEY to position the image vertically.

Press E

XIT to return to a presentation level.

NOTE: Use the L

ENS key (built-in keypad) with the general UP/DOWN ARROW KEY to get the same effect as

if using the arrow keys related to “Lens V” or “Lens H” on the Remote Keypad. All 4 lens settings can be

adjusted by using the soft keys.

Laser

Press L

ASER to activate the laser pointer on the remote. Point the remote

at the screen to highlight an area of your presentation.

NOTE: Leave batteries in the wired remote keypad for the L

ASER key to

work.

3.2 Navigating the Menus

Main Menu

Most of the projector controls are accessed from

within the projector’s menu system. There are several

groups of related functions, with each group selectable

from the Main menu as shown at right. Press

MENU at

any time to display this Main menu.

On the remote keypad, enter the number correspond-

ing to the function menu you wish to access, such as 2

for the Image Settings menu. Or use the

UP/DOWN

ARROW KEY on any keypad to highlight the desired

option, then press

ENTER. The corresponding function

menu or pull-down list of further options will appear.

With a function menu displayed, enter a menu option number for any numbered option, or use the

UP/DOWN

ARROW KEY to highlight the desired option and then press ENTER. Long menus have a scroll bar on the right—

use the arrow keys to access the remainder of the menu. Locked items or items that do not pertain to the current

action or condition appear dimmed and cannot be selected.

When finished with a Function menu:

• Press

EXIT to return to the previous screen.

-OR-

• Press

MENU to leave the menu system and return to the presentation.

NOTES: 1) If there is no signal present, all source-dependent adjustments are disabled. 2) After 15 minutes

of inactivity, the projector leaves the menu system and returns to the presentation.

3) The Status menu is

read-only.

FIGURE 3-3 MAIN MENU

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 53 54

Comments to this Manuals

No comments

Christie Christie HD Setup Guide Page 31

Comments to this Manuals

Related products and manuals for Data projectors Christie Christie HD