Christie PowerTool User Manual download pdf (Page 16)

Section 2: Installation and Setup

2-4 PowerTool 2.0 User Manual

020-100035-02 Rev. 1 (03-2010)

2.2.2 Configure Projector ID

Each projector must have a unique identification number. Automatic

detection of projectors can fail if projectors have duplicate IDs.

The projector’s menu can be accessed eithe

r via the keypad on the projector

or the remote control. The menus are displayed on the projected screen. All

menu options are numbered. Menu items can be selected by using the up and

down arrow buttons and then pressing

ENTER, or by pressing the option

number from the keypad.

NOTE: Configuring IDs is required only when the projectors are connected

serially.

1. Press the

MENU button to access the main menu.

Figure 2-4 Projector Keypad

2. Select 4 CONFIGURATION.

3. Select

7 COMMUNICATION.

4. Select

3 PROJECTOR.

5. Specify a unique identification number.

6. Press the

MENU button to exit the projector's menu structure.

NOTE: If you do not have a remote, use the left and right arrow keys on the

projector to select a number.

2.3 Software Installation

2.3.1 Installing PowerTool From the MASTERSuite Interface

1. From the MASTERSuite interface, click the MASTERSuite

button>Client Applications.

2. Click I

nstall PowerTool.

3. Follow the instructions in the installation wizard.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 51 52

No comments

Christie PowerTool User Manual Page 16