Section 4: PowerTool Interface
PowerTool 2.0 User Manual 4-15
020-100035-02 Rev. 1 (03-2010)
• When using two analog signals, each must be <90MHz.
• Avoid using an interlaced source in the PIP window.
• Seamless switching may affect image quality
in some cases.
PIP Image
Brightness, contrast, and gamma for the PIP image behave in the same way
as brightness, contrast, and gamma for the main image. For details, see
Contrast on page 4-8.
4.5.6 Status Tab
Figure 4-14 Status
Device Information – Identifies the selected projector and the installed
firmware, and tracks the operation hours for the lamp and projector.
Temperature Readings – Indicates the current operati
ng temperatures for
various components in the projector chassis.
Refresh Date and Time – Allows you to refresh the status information
for the selected projector(s) immediately
. The projector’s status light glows
orange if the last status update did not complete.
Comments to this Manuals