Christie PowerTool User Manual download pdf (Page 38)

Section 4: PowerTool Interface

4-12 PowerTool 2.0 User Manual

020-100035-02 Rev. 1 (03-2010)

4.5.4 Lamp Tab

Figure 4-12 Lamp

Lamp Mode

Lamp Mode List – Indicates the lamp usage mode that regulates the lamp’s

power and light output.

Max brightness – The lamp burns as brightly as

possible, driven by

100% of the power level rating for the installed lamp. Maximum

brightness for any lamp gradually diminishes with age and images

become dimmer over time. The lamp’s current output level is reflected

in the Intensity control.

Intensity – Brightness remains close to the specified

level for as long

as possible. If you select this option, you must also set the desired

intensity level using the Intensity control. The projector will

automatically adjust power as needed to maintain this intensity as

closely as possible.

Power – Power supplied to the lamp will remain at the specified

watt

age level. If you select this option, you must also set the power level

using the Power (W) control.

Power (W) – Indicates the lamp power level in wat

ts. The range depends

on the projector model. This control is enabled when you select Power from

the Lamp Mode drop-down list. Enabled when Lamp Mode is set to Power.

Intensity – Indicates the light intensity setting for the lamp. The range is 0-

999

9. Note that the intensity value is a correlation only and does not

represent a lumens level. This control is enabled when you select Intensity

from the Lamp Mode drop-down list. Enabled when Lamp Mode is set to

Intensity.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 51 52

No comments

Christie PowerTool User Manual Page 38