Christie Mirage 5000 User Manual download pdf (Page 15)

Section 2: Installation and Setup

User’s Manual 2-11.

Mounting

There are several methods for mounting the projector. Depending on your chosen

installation, one method may be more suitable than another. In typical front and rear

screen installations the projector can be mounted to a secure and level surface, such as

a table or cart. Carts are useful when the projector has to be moved during a

presentation or from site to site. It is recommended you lock the wheels on a cart,

when it’s in position, to prevent someone from accidentally moving it during a

presentation.

CEILING MOUNT - The projector can also be inverted and suspended from the ceiling

using a specially designed ceiling mount fixture. This type of mounting is

recommended for fixed installations and for those that want the projector out of plain

view or have a limited amount of space for projector and audience. (Available 2005)

Use only the CHRISTIE approved ceiling mount kit designed for

your projector.

SPECIAL MOUNTING – The projector can be rotated (front-to-back) up to 360 degrees

and mounted without it affecting performance. However, the side-to-side tilt limit of

the projector must not exceed ±15 degrees. This tilt limit is required to ensure optimal

performance of the projector.

Adjusting projector height

You can modify the height of the projector to remedy a slightly unlevel mounting

surface by adjusting the two feet threaded into the bottom chassis. Turn each foot

clock-wise or counter-clockwise until the project is level on all sides.

Folded Optics

In rear screen applications where space behind the projector is limited, a mirror may

be used to fold the optical path. See Figure 2.6. The position of the projector and

mirror must be accurately set – if considering this type of installation call your dealer

for assistance.

Figure 2.6.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 143 144

No comments

Christie Mirage 5000 User Manual Page 15