Christie CP 2210 User Manual Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 164
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
1-2 CP2210 User Manual
020-100410-07 Rev. 1 (01-2012)
Section 1: Introduction
radiation levels exceeding the government guidelines for your area. 2) Be aware that some
medications are known to increase sensitivity to UV radiation.
This projector must be operated in an environment that meets the operating range specification, as listed in
Appendix B: Specifications.
1.2.1 AC/Power Precautions
Use only the AC power cord supplied. DO NOT attempt operation if the AC supply is not
within the specified voltage and power range. For details, refer to Section 6 Specifications.
As a safety feature the projector is equipped with a three-wire plug with a third (grounding)
pin. If you are unable to insert the plug into the outlet, contact an electrician to have the
outlet replaced. DO NOT defeat the safety purpose of the grounding-type plug.
DO NOT attempt operation if the AC supply is not within the rated voltage range, as speci-
fied on the license label.
Disconnect projector from AC before opening any enclosure.
DO NOT allow anything to rest on the power cord. Locate the projector where the cord can-
not be damaged by persons walking on it or objects rolling over it. Never operate the pro-
jector if the power cable appears damaged in any way.
DO NOT overload power outlets and extension cords as this can result in fire or shock haz-
ards.
Note that only qualified service technicians are permitted to open any enclosure on the
product and only if the AC has been fully disconnected from the product.
1.2.2 Power Cords and Attachments
The North American rated line cord is provided with each projector. Ensure
that you are using a line cord, socket and power plug that meets the appropriate local rating
standards. Use only an AC power cord recommended by Christie. DO NOT attempt operation
if the AC supply and cord are not within the specified voltage and power range.
NOTICE: Use only the attachments and/or accessories recommended by Christie. Use of others may result in
the risk of fire, shock and personal injury.
1.2.3 Lamp Precautions
EXPLOSION HAZARD! Wear authorized protective safety gear whenever the
lamp door is open! Never attempt to remove the lamp directly after use. The lamp is under
significant pressure when hot and cold, and may explode, causing personal injury and/or
property damage.
Any lamp used in the CP2210 is under high pressure and must be handled with great care at all times. Lamps
may explode if dropped or mishandled.
Wear Protective Clothing
Never open the lamp door unless you are wearing authorized protective clothing such as that included in a
Christie Protective Clothing Safety Kit (P/N: 598900-095). Recommended protective clothing includes, but
WARNING
WARNING
DANGER
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 163 164

Comments to this Manuals

No comments