Christie CP 2210 User Manual download pdf (Page 53)

Section 3: Operation

CP2210 User Manual 5-5

020-100410-07 Rev. 1 (01-2012)

5.6 Work with Lenses

The lens mount secures the primary zoom lens to the projector and provides setup adjustments for correct

boresight, and manually controlled focus, zoom and offsets. See Section 4.3 Basic Image Alignment for all lens

installation and boresight instruction.

An anamorphic lens (1.25x) can be installed into the optional motorized auxiliary lens mount, then adjusted

into place in front of the primary lens to widen a “squeezed” image into a properly proportioned “scope”

anamorphic cinema display. It is typically used in theatres having side masks that are retracted for “scope”

images, or in theatres having fixed side masking but a very short throw ratio.

5.6.1 Access the ILS

On the Main screen of the TPC, tap Advanced Setup > ILS File Setup.

5.6.2 Enable ILS on a Channel

1. On the Main screen of the TPC, tap a channel.

2. Tap the Test Patterns button and then tap a test pattern.

3. On the Main screen of the TPC, tap Lens Adjust.

4. Tap Enable Automatic ILS to automatically apply the active channel settings.

5.6.3 Alter the Active ILS Settings

1. On the Main screen of the TPC, tap Lens Adjust.

2. Tap

Enable Automatic ILS.

3. Tap the directional arrows to adjust the values displayed in the X, Y, and Zoom fields. These values over-

write the ILS settings.

5.6.4 Maintain Lens Position Regardless of Selected Channel

1. On the Main screen of the TPC, tap Lens Adjust.

2. Clear the Enable Automatic ILS check box.

Figure 5-1 Lens Mount

Lock/Unlock Clamp

Horizontal

Boresight

Adjust (Left)

Horizontal

Boresight

Adjust (Right)

Vertical Boresight Adjust

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 163 164

No comments

Christie CP 2210 User Manual Page 53