Christie CP 2210 User Manual download pdf (Page 85)

Section 6: Projector Menus

CP2210 User Manual 6-31

020-100410-07 Rev. 1 (01-2012)

6.14.6 Source File Setup Window

Use the Source File Setup window to create source files that store resolution, offset, and aspect ratio settings

for input devices

. Tap Menu > Advanced Setup > Source File Setup.

Table 6.18 Source File Setup Window

In Moves the MALM to the right or left. If the MALM is in the OUT position (right), the MALM moves

to the IN position (left) before the incremental adjustments begin.

Out Moves the MALM to the right or left. If the MALM is in the IN position, the MALM moves to the

OUT position (right) before the incremental adjustments begin.

Control Description

1: Resolution The X and Y resolution of the incoming signal. For example, 2048 (X) and 858 (Y) or 1920 (X) and 1080 (Y).

The resolution must match the incoming signal format. Tap once to increase or decrease the resolution by a

single increment. Tap and hold a button to increase or decrease the resolution by multiple increments.

2: Offset The amount of incoming data to discard. Set the values to zero to process all incoming data. Tap once to

increase or decrease the offset by a single increment. Press and hold a button to increase or decrease the offset

by multiple increments.

The allowable X range is -4096 to 4096 pixels and Y range of -2160 to 2160 pixels.

3: Aspect Ratio The aspect ratio for the incoming signal. The allowable range is 0 to 7.99..

Control Description

Figure 6-24 Source File Setup Window

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 163 164

No comments

Christie CP 2210 User Manual Page 85