Christie CP2000-M Setup Guide download pdf (Page 14)

2-6 CP2000-M/MR Setup Guide

020-100205-03 Rev. 1 (05/09)

Section 2: Basic Operation

• If the back light turns OFF, push any key to turn it ON again.

2.4.2 Navigating the CDP Menus

Most basic controls of the projector are accessed from within

the projector’s menu system. There are several groups of

related functions, with each group selectable as a menu item in

the Main menu (Figure 2-3). Press

MENU at any time to

display the Main menu. With the Main menu displayed, use

the arrow keys to highlight the desired option, then press

ENTER

to make the selection. The corresponding function menu or

pull-down list containing further options will appear. Extra

long menus are indicated by a small arrow in the bottom right

corner of the display. To scroll through a list of items, use the

down arrow key. Once past the 4 line limit of the display,

another arrow appears in the upper-left corner to allow

scrolling of the menu in both directions. Press

EXIT once to

return to the previous level of options.

Navigation Icons

Various status icons are used in the CDP display to convey projector status. With the exception of the

status icon, all other CDP icons appear on the display as the functions are enabled or disabled.

Status Icon: Appears in the upper-right corner of the CDP display to indicate communication

status. When flashing, active communication is taking place. When solid, it can mean communication

is temporarily stalled (i.e., too many keypresses entered at a time) or communication with the projector

has failed.

Service Icon: Appears whenever the following functions are ON: Lamp Change, Lamp

Rotation or Filter Change. NOTE: By default, lamp rotation is disabled.

Power Icon: Appears when power to the projector is in POWER ON mode (not in STANDBY).

Error Icon: Appears whenever a critical error occurs.

Lamp ON Icon: Appears when the lamp is ON.

Lamp OFF Icon: Appears when the lamp is OFF.

Douser Open Icon: Appears when the douser is OPEN.

Douser Closed Icon: Appears when the douser is CLOSED.

Additional menu items available, press ENTER to view.

Menu option is enabled (ON).

Menu option is disabled (OFF).

FIGURE 2-3 MAIN MENU

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 73 74

No comments

Christie CP2000-M Setup Guide Page 14