Section 2: Basic Operation
CP2000-M/MR Setup Guide 2-11
020-100205-03 Rev. 1 (05/09)
2.6 LAMP MENU
The Lamp menu (Figure 2-5) provides controls for optimizing lamp alignment (LampLOC™),
maintaining a consistent light output over time (LiteLOC™), rotating the lamp, or setting a precise
power level for the lamp. These options are also available via the web ui Advanced:Lamp menu. For
information, refer to the CP2000-M/MR User Manual (020-100123-xx).
• LampLOC: This menu selection enables users to either automatically adjust LampLOC™ or to
manually adjust each axes.
• Lamp Change: This menu contains the lamp type, serial number and the number of hours already
logged on the lamp, if any. Acknowledge a lamp change has taken place by pressing Enter. For
information on lamp changeover, refer to the CP2000-M/MR Service Manual (020-100124-xx).
• Lamp Rotate: Lamp rotation is performed to physically rotate the bulb 180° to ensure an even burn
of the lamp. Rotating the lamp improves its performance and life expectancy. Lamp rotation must be
performed by Christie trained personnel only
. The same safety precautions taken during lamp
replacement must be taken when performing a lamp rotation. For details, refer to
4.1
Lamp Replacement. Acknowledge lamp rotation has taken place by accessing this menu and
pressing Enter.
FIGURE 2-5 LAMP MENU
Comments to this Manuals