Christie RPMX-D132U Setup Guide download pdf (Page 55)

Section 6: Specifications

RPMX/RPMSP-D132U & RPMSP-D180U Setup Guide 6-3

020-100246-02 Rev. 1 (10-2010)

COMPOSITE VIDEO

AND S-VIDEO

Signal Formats Composite-video (CVBS) S-video (Y/C)

Video Standards NTSC, NTSC 4.43, PAL, PAL M, PAL N, PAL60, SECAM

Input Levels Composite-video 1.0Vp-p 3db (including sync tip)

S-video luma (Y):

1.0Vp-p 3dB (including sync tip)

S-video chroma (C) 630mV nominal (burst)

DC Offset 2V

Nominal Impedance 75 ohms

DVI-I – ANALOG

Input Characteristics Same as Analog RGB except as noted below.

Formats RGB or YPbPr – video signal cannot be routed to the decoder

Sync Types Separate H and V (direct or swapped)

Bi-level – TTL levels only

Composite (XOR, OR)

Sync-on-green

Serrations and/or Equalization pulses

MacroVision (standard & progressive)

Analog Sync Logic Low 0V – 0.8v

Analog Sync Logic High 2.4V – 5V

Analog Sync Input

Impedance

1k

DVI-I – DIGITAL

Input Characteristics

meets DVI spec

DVI Cable Length

Max Pixel Rate

165 MPix/s

EDID

Supported

HDCP

(High Speed Digital

Content Protection)

Supported

RS-232/RS-422 SERIAL

INPUT

Connector Type 2 male DB9 (RS-232 OUT, GPIO)

2 female DB9 (RS-232 IN, RS-422 IN)

1 2 ... 50 51 52 53 54 55 56 57 58 59 60

Comments to this Manuals

No comments

Christie RPMX-D132U Setup Guide Page 55

Comments to this Manuals

Related products and manuals for Projectors Christie RPMX-D132U