Status Read Commands
9-6 LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information
020-000046-02 Rev 2 (07-2011)
9.4.18 CR_IMGGMD Command
Command
“CR_IMGGMD” [CR]
Detail
Get setting status of Standard/Real/Cinema in Image Gamma
Response Acceptable
“000_%1” [CR]
%1
“STD” - Standard
“REL” - Real
“CNM” - Cinema
Unacceptable
“?” [CR]
9.5 PC Status Read Commands
9.5.1 CR_FSYNC Command
Command
“CR_FSYNC” [CR]
Detail
Get value of Fine Sync
Response Acceptable
“000_%1” [CR]
%1
“0000” – “0031”
Unacceptable
“Error Code” [CR] - When command is invalid in the
given condition (such as being selected input)
“?” [CR] - When unknown command is received
9.5.2 CR_TDOTS Command
Command
“CR_TDOTS” [CR]
Detail
Get value of Total Dots
Response Acceptable
“000_%1” [CR]
%1
“mmmm” – “nnnn”
(mmmm = Display area H + Position H)
(nnnn = Maximum value less than 140 MHz of Dot
Clock)
Unacceptable
“Error Code” [CR] - When command is invalid in the
given condition (such as being selected input)
“?” [CR] - When unknown command is received
9.5.3 CR_H-POS Command
Command
“CR_H-POS” [CR]
Detail
Get value of Horizontal Position
Response Acceptable
“000_%1” [CR]
%1
“0000” – “ nnnn” (nnnn = Total Dots - Display Area
H)
Unacceptable
“Error Code” [CR] - When command is invalid in the
given condition (such as being selected input)
Comments to this Manuals