Section 5: Parts and Module Replacement
CP2000-M/MR Service Booklet 2-15
020-100220-02 Rev. 1 (07/08)
5. Use a #2 Phillips™ to remove the 2 screws from the AC
receptacle (Figure 2-11).
6. Pull the skin forward and out.
7. Reverse the above steps to reinstall.
2.5.12 INTAKE DUCT
(5 minutes)
1. Remove top lid. Refer to 2.5.5 Top Lid, on page 2-10
.
2. Use a #2 Phillips™ to remove the 6 screws securing the
high security cover, unlock the high security access lock,
lift the lid and slide out (Figure 2-12).
FIGURE 2-12 REMOVE SECURITY COVER
3. Use a #2 Phillips™ to remove the 3 screws from the corners of the intact duct (Figure 2-13).
4. Remove the duct by pulling it up and out.
FIGURE 2-13 REMOVE DUCT
FIGURE 2-11 AC RECEPTACLE
Comments to this Manuals