Christie LW600 User Manual Page 31
- Page / 101
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Status Read Commands
LW600-LX900-LX1000 RS232 Codes-Expanded Technical Reference Information 8-3
020-000046-02 Rev 2 (07-2011)
8.4.3 CF_COLOR Command
Command
“CF_COLOR_%1” [CR]
%1
“000-063”- Directly specify setting value of Color
“UP”- Increment setting value of Color by 1
“DN”- Decrement setting value of Color by 1
Detail
Set user controlled value of Color (available only in the normal Power
ON status).
The value set by this command is not stored in the projector’s
memory. Therefore, when the power is turned to ALL OFF status, the
value returns to the original setting. (It is stored in Suspend mode.)
Response Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
8.4.4 CF_TINT Command
Command
“CF_TINT_%1” [CR]
%1
“000-063”- Directly specify setting value of Tint
“UP”- Increment setting value of Tint by 1
“DN”- Decrement setting value of Tint by 1
Detail
Set user controlled value of Tint (Available only in the normal Power
ON status)
The value set by this command is not stored in the projector’s
memory. Therefore, when the power is turned to ALL OFF status, the
value returns to the original setting. (It is stored in Suspend mode.)
Response Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
8.4.5 CF_COLMNAV Command
Command
“CF_COLMNSAV_%1” [CR]
%1
“000 – 009” - Specify the area to store
Detail
Store current setting status of Color Management to the area
specified in %1 (available only in the normal Power ON status)
Response Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
8.4.6 CF_COLMNLD Command
Command
“CF_COLMNLD_%1” [CR]
%1
“000 – 009” - Specify the area to store
Detail
Retrieve Color Management setting status from the area specified
in %1 (available only in the normal Power ON status)
Response Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
- LW600-LX900-LX1000 RS232 1
- Codes-Expanded 1
- Table of Contents 3
- Table of Contents 9
- 1 Overview 11
- 2.1 Transfer Specification 13
- 2.2 Connection 13
- 3 Notes for Communication 15
- 4 Notation 17
- 5.1 Image Command Table 19
- 5.4 Screen Command Table 20
- 5.5 Lamp Command Table 21
- 5.6 Setting Command Table 21
- Status Read Commands 23
- Status Read Commands 24
- 7 Error Code Table 27
- 8.1 Format 29
- 8.2 Transfer Example 29
- 8.3 Operation Requirements 30
- 8.4 Image Command 30
- 8.4.3 CF_COLOR Command 31
- 8.4.4 CF_TINT Command 31
- 8.4.5 CF_COLMNAV Command 31
- 8.4.6 CF_COLMNLD Command 31
- 8.4.7 CF_APCTRL Command 32
- 8.4.8 CF_COLTEMP Command 32
- 8.4.9 CF_WBAL- Command 32
- 8.4.10 CF_OFFSET- Command 33
- 8.4.11 CF_SHARP Command 33
- 8.4.12 CF_GAMMA Command 33
- 8.4.13 CF_NZRED Command 34
- 8.4.14 CF_PROGV Command 34
- 8.4.15 CF_IMAGE Command 35
- 8.5 PC Control Command 36
- 8.5.2 CF_TDOTS Command 37
- 8.5.3 CF_H-POS Command 37
- 8.5.4 CF_V-POS Command 38
- 8.5.5 CF_CLAMP Command 38
- 8.5.6 CF_DDOTS Command 39
- 8.5.7 CF_DLINE Command 39
- 8.5.8 CF_SETPCADJ Command 40
- 8.5.9 CF_ORGMODE Command 40
- 8.5.10 CF_PCSTORE Command 41
- 8.6 Input Control Command 42
- 8.6.3 CF_INPUT1~4 Command 43
- 8.6.4 CF_SYSTEM Command 43
- 8.7 Screen Control Command 45
- 8.7.2 CF_DZCENT Command 46
- 8.7.3 CF_KEYSTONE Command 46
- 8.7.5 CF_CEIL Command 47
- 8.7.6 CF_REAR Command 47
- 8.7.7 CF_VSCALE Command 48
- 8.7.8 CF_VPOS Command 49
- 8.7.9 CF_HSCALE Command 50
- 8.8 Lamp Command 51
- 8.8.2 CF_LAMPMODE Command 52
- 8.9 Setting Commands 53
- 8.9.3 CF_BACKGND Command 54
- 8.9.4 CF_LOGO Command 55
- 8.9.5 CF_FANSPEED Command 55
- 8.9.6 CF_RCODE Command 56
- 8.9.7 CF_RSENS Command 56
- 8.9.8 CF_P-MANE Command 57
- 8.9.10 CF_ON-STA Command 57
- 8.9.11 CF_PJPINCODE Command 58
- 8.9.12 CF_FILH Command 58
- 8.9.13 CF_FILTIMER Command 58
- 8.9.14 CF_FILCTL Command 59
- 8.9.15 CF_FILSCRL Command 59
- 8.9.16 CF_TESTPAT Command 59
- 8.9.17 CF_FDEFAULT Command 59
- 8.9.18 CF_KEYDIS Command 60
- 8.9.19 CF_SHUTRCPROT Command 60
- 8.9.21 CF_SHUTH Command 60
- 8.10 Other Command 61
- 9 Status Read Command 63
- 9.4.2 CR_BRIGHT Command 64
- 9.4.3 CR_COLOR Command 64
- 9.4.4 CR_TINT Command 64
- 9.4.5 CR_APCTRL Command 64
- 9.4.6 CR_COLTEMP Command 65
- 9.4.7 CR_WBAL-R Command 65
- 9.4.8 CR_WBAL-G Command 65
- 9.4.9 CR_WBAL-B Command 65
- 9.4.10 CR_OFFSET-R Command 65
- 9.4.11 CR_OFFSET-G Command 66
- 9.4.12 CR_OFFSET-B Command 66
- 9.4.13 CR_SHARP Command 66
- 9.4.14 CR_GAMMA Command 66
- 9.4.15 CR_NZRED Command 66
- 9.4.16 CR_PROGV Command 67
- 9.4.17 CR_IMAGE Command 67
- 9.4.18 CR_IMGGMD Command 68
- 9.5.1 CR_FSYNC Command 68
- 9.5.2 CR_TDOTS Command 68
- 9.5.3 CR_H-POS Command 68
- 9.5.5 CR_CLAMP Command 69
- 9.5.6 CR_DDOTS Command 69
- 9.5.7 CR_DLINE Command 69
- 9.5.4 CR_V-POS Command 69
- 9.5.8 CR_SETPCADJ Command 71
- 9.5.9 CR_ORGMODE Command 72
- 9.5.10 CR_PCSTORE Command 73
- 9.6.1 CR_SERSYS Command 73
- 9.7 Input Read Command 74
- 9.7.3 CR_SYSTEM Command 75
- 9.7.4 CR_SRCINP1 Command 76
- 9.7.5 CR_SRCINP2 Command 78
- 9.7.6 CR_SRCINP3 Command 78
- 9.7.7 CR_SRCINP4 Command 78
- 9.7.8 CR_HMSLOT Command 78
- 9.7.9 CR_NMSLOT1 Command 79
- 9.7.10 CR_NMSLOT2 Command 79
- 9.7.11 CR_NMSLOT3 Command 79
- 9.7.12 CR_NMSLOT4 Command 79
- 9.7.13 CR_IDSLOT1 Command 80
- 9.7.14 CR_IDSLOT2 Command 81
- 9.7.15 CR_IDSLOT3 Command 81
- 9.7.16 CR_IDSLOT4 Command 81
- 9.8.1 CR_SCREEN Command 82
- 9.8.2 CR_KYSTNMODE Command 82
- 9.8.3 CR_CEIL Command 82
- 9.8.4 CR_REAR Command 83
- 9.8.5 CR_VSCALE Command 83
- 9.8.6 CR_VPOS Command 83
- 9.8.7 CR_HSCALE Command 83
- 9.8.8 CR_HPOS Command 83
- 9.9.1 CR_LAMPREPL Command 84
- 9.9.2 CR_LAMPMODE Command 84
- 9.9.4 CR_LAMPSTS Command 85
- 9.9.5 CR_INFLAMP Command 85
- 9.9.6 CR_PROJH Command 85
- 9.9.7 CR_HMLAMP Command 85
- 9.9.8 CR_LAMPH Command 86
- 9.10.1 CR_BACKGND Command 86
- 9.10.2 CR_DISP Command 87
- 9.10.3 CR_LOGO Command 87
- 9.10.4 CR_LOGOLOCK Command 87
- 9.10.5 CR_RCODE Command 87
- 9.10.6 CR_RSENS Command 88
- 9.10.7 CR_LANG Command 88
- 9.10.8 CR_ON-STA Command 88
- 9.10.9 CR_P-MANE Command 89
- 9.10.12 CR_KEYDIS Command 89
- 9.10.15 CR_SHUTH Command 90
- 9.10.19 CR_FILH Command 91
- 9.10.20 CR_FILCOND Command 91
- 9.10.21 CR_FILREPL Command 92
- 9.10.24 CR_TESTPAT Command 93
- 9.11.1 CR_STATUS Command 93
- 9.11.2 CR_SIGNAL Command 94
- 9.11.3 CR_VMUTE Command 94
- 9.11.4 CR_FREEZE Command 94
- 9.11.5 CR_P-TIMER Command 94
- 9.11.6 CR_TEMPWARN Command 95
- 9.11.7 CR_TEMPFAIL Command 96
- 9.11.8 CR_SERIALNO Command 96
- 9.11.9 CR_SHUTCOND Command 97
- 10.1 Overview 99
- 10.2.1 Format 100
- 10.2.2 Command pipelining 100
- 10.3.1 Format 101
Related products and manuals for Projectors Christie LW600
Projectors Christie 38-VIV205-01 User Manual
(44 pages)
(44 pages)
Projectors Christie LS+700 User Manual
(54 pages)
(54 pages)
Projectors Christie LX750 User Manual
(28 pages)
(28 pages)
Projectors Christie DWX951 User Manual
(111 pages)
(111 pages)
Projectors Christie CP2000-X Setup Guide
(64 pages)
(64 pages)
(28 pages)
Projectors Christie LCD projector User Manual
(140 pages)
(140 pages)
Projectors Christie LW600 User Manual
(32 pages)
(32 pages)
Projectors Christie Entero RPMWU Setup Guide
(58 pages)
(58 pages)
Projectors Christie DS+650 User's Guide
(33 pages)
(33 pages)
Projectors Christie q series User Manual
(44 pages)
(44 pages)
Projectors Christie CP2000-X Setup Guide
(64 pages)
(64 pages)
Projectors Christie 4000 User Manual
(4 pages)
(4 pages)
© 2020, manymanuals.com. All rights reserved. | 0.340 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals